MQ Ultimate suspension install

MQ Ultimate suspension install

Postby MulletGuts on Fri Jun 01, 2018 9:23 pm

Hi All, I just had a Ultimate suspension installed on my 2017 MQ GLS Triton. Specs for type of suspension was comfort ride with no lift. Height measurements before install was front 538mm and rear 585mm. Now with new suspension installed, height is front 565mm and rear is 650mm. Raised 27mm front and 65mm rear.
Is this lift height normal for a suspension that was susposed to be with no lift? Ride is great now but car sits very high in rear.
MulletGuts
 
Posts: 4
Joined: Thu Jun 19, 2014 8:49 pm


 

Re: MQ Ultimate suspension install

Postby NowForThe5th on Fri Jun 01, 2018 11:11 pm

Give it time to settle.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: MQ Ultimate suspension install

Postby Sid3169 on Mon Jun 04, 2018 5:20 am

MulletGuts wrote:Hi All, I just had a Ultimate suspension installed on my 2017 MQ GLS Triton. Specs for type of suspension was comfort ride with no lift. Height measurements before install was front 538mm and rear 585mm. Now with new suspension installed, height is front 565mm and rear is 650mm. Raised 27mm front and 65mm rear.
Is this lift height normal for a suspension that was susposed to be with no lift? Ride is great now but car sits very high in rear.

Hey mullet could I ask where you took measurements from and yes as above it should settle.
Sid3169
 
Posts: 13
Joined: Sun Feb 19, 2017 3:35 pm

Re: MQ Ultimate suspension install

Postby NowForThe5th on Mon Jun 04, 2018 8:56 am

Suspension height measurements are always taken from centre of wheel centre cap to underside of guard or wheel arch mould.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: MQ Ultimate suspension install

Postby MulletGuts on Mon Jun 04, 2018 6:40 pm

NowForThe5th wrote:Suspension height measurements are always taken from centre of wheel centre cap to underside of guard or wheel arch mould.


Yes, this is how I measured the front and back.
MulletGuts
 
Posts: 4
Joined: Thu Jun 19, 2014 8:49 pm


Return to Suspension

Who is online

Users browsing this forum: No registered users and 2 guests