MN Inlet Manifold Torque Specs

[JDS Surf]

Removed my manifold to clean and it is currently soaking overnight to remove all the sludge.

Just curious if anyone knows what torque I should be tightening the inlet manifold bolts too?

Thanks

Jared

[explorer.dave]

http://faq.out-club.ru/download/l200_20 ... dex_M1.htm

You will find it here.

[murwullambah]

Was it a reasonably easy enough job?, might attempt mine soon

[Cowboy Dave]

Here ya go

[JDS Surf]

Thanks for the quick responses.

Just heading out to put it all back together now. It was not overly blocked but definitely at least a restriction of 10% or more and more so on the back 2. Vehicle has 150,000km's on it.

[snakesoup]

are you original owner mate or has it possibly been cleaned previously ?

[Wylie5]

Hi,
just looking to see if their is a order that they have to be done up in, or do you just slowly work your way around. ?

Andrew.

[Cowboy Dave]

Having trouble uploading a photo/image so here's a link which will hopefully work

https://goo.gl/photos/QejgU4AfSQRFg6Hq8

[Cowboy Dave]

Then again

[Wylie5]

Thank you, very much. For the info...

[Wylie5]

Snakesoup: sorry for coming back, yes l am the original owner, it has not been cleaned that l am aware of.

Regards Andrew.

[highlandertriton]

Hi mate, what did you soak it in ?? did it work fine ??

Cheetrs

[NowForThe5th]

I'm going to lock this now. The thread is about torque specs and answers have been given which make it of value. Drifting off topic, when there are lots of other threads on those subjects, doesn't add to the thread.