ECU Error Code - P0093

[dadz]

So far after changing my SCV with after market. No P0093 code some pics of the SCV the flesh color/smal is the standard or stock SCV, the blue /big is the after market one.

[NTBB]

How much did that cost you dadz Do you have any other info like brand/make and did you fit it or did you get a mechanic to fit it sorry for all the qestions but they seem like a part that you may have to replace once the Triton runs out of warranty or you have way to many mods to get warranty work done.....

[CHIP IT]

We might be able to do a group buy guys as the importer is a dealer of ours.

Cheers

[dadz]

The brand is "Denso", it cost me 5,000 baht. i did install it my self. The position is the same only it have an adapter to compensate the long neck. One big difference is that the holes on the side is a bit bigger that the stock and also the hole under is bit bigger the spring as i feel it is also different.

3.2 engines can not handle dirty fuel or even a bio fuel. With it they say all is fine, so went out get a full tank of B5(5% bio) and test run the whole day even running hard. Boost went up to 22 psi, around 3,000 rpm and 140KPH. no check engine, no error code (maybe just one P0234-Over Boost, because im setting the normal boost controller).

Until now i have use half of my tank test run around 250 kilometers. Maybe my problem is solve.

About warranty i have no idea, because im out of warranty already.

[scubapro]

Rob keep us posted on a possible group buy please. Mine is also out of warranty.

[NTBB]

Thanks dadz 5000 bart = $166.00 aud good price I think Mitsu wants $300.00 plus for the stock one...

[dadz]

Thanks dadz 5000 bart = $166.00 aud good price I think Mitsu wants $300.00 plus for the stock one...

Oh yes even in the philippines the dealer change to much.

The stock SCV cost 3,000 baht. This one cost me 5,000 baht.

[scubapro]

where is the SCV located?

[Homer]

^^^His is in Thailand..sorry not funny

[dadz]

My P0093 error is gone, did a dyno test yesterday with my new injection chip and combine it with my commonrail chip. run it hard really hard the boost gauge went 360 degrees and pass the number 10 again..........................only check engine i got is over boost hehehehehehehehehe

@Homer it is funny dude.................

@scobapro will email you the information and installation.

[scubapro]

Homer I should have expected that one from a canetoad

[tokirky]

@scobapro will email you the information and installation.

dadz can you send me the info as well please...PM or on here out loud....

[scubapro]

My SCV is on its way

[snowman]

keep the details handy mate........

[dadz]

Since i install the new SCV, block the EGR and modify my common rail presure released valve, about 12 days ago.



NO MORE Error code.......................Bye Bye P0093.

[scubapro]

Dadz did you get the transfer??

[dadz]

Will check later sir just got back last night from my manila trip.

As soon as you get it i will send you a installation instruction.

[dan.batto]

Driving home from the folks place just now on the freeway, about change lanes to exit for my place and BAM! Engine light and limp mode! Bloody dangerous, busy freeway, person next to me wouldn't speed up or slow down, cars up my clacker and I have the 2 week old young feller in the car!!! P0093 code came up when I got off and checked, haven't done anything to the car in a long time, tells me that maybe it's the SCV?
Chipped, Tony's mod, not sure on tune because I don't touch it.


Sent from my iPhone using Tapatalk

[variflex]

Did you get the code fixed dan?
I have just experienced the same thing, she's at the mechanics at the moment who wants to change the SCV, Fuel rail pressure limiter and fuel pressure sensor

[Naff]

Did you get the code fixed dan?
I have just experienced the same thing, she's at the mechanics at the moment who wants to change the SCV, Fuel rail pressure limiter and fuel pressure sensor

So he's guessing it's one of those? If in doubt replace everything?

[variflex]

Mechanic was leaning toward the SCV, I was more thinking the Rail Pressure limiter, only other item left was the pressure sensor, figured wed just replace all three,

[coughy]

guys the p0093 in the mitsy book is
Quote from manual "Fuel leak problem"
and start looking at the rail pressure sensor it will need to be checked and test the plug on it..

PROBABLE CAUSES



Fuel leakage or fuel line blocked

Failed injector

Failed rail pressure sensor

Harness damage in rail pressure sensor circuit or loose connector contact

Failed suction control valve

Failed engine-ECU

[Snooozy]

I used to get the same fault when I first fitted the chip, It turned out to be a faulty chip loom.

The ECU was sensing sudden fuel rail pressure drop & threw the code.

It could be the rail pressure limiter with a weak spring. Tony would be you man to answer this one

[variflex]

Thanks Snoozy, had a chat with Tony last night, expecting the car back late today, will see how it all goes

[trouble]

Meh get this code a lot, just clear it and stand on the loud pedal!


ML's eating MN's and shitting out MQ's!