The newtriton snorkel hole-saw rental thread.

[adamvchorek]

I am not sure who has the hole saw pieces now but I would like to put my hand up to be next in line. Does Bounce_23 have them or someone else I should PM?

[badenglxr]

I sent the hole saw back to bounce_23 as he hasn't used it yet but kindly let me use it

[Froggy]

Come on bounce ya wuss! Slice up that quarter panel!

[fridgie]

Will get in touch with him and tell him to get the beers ready

Bloody sook, I reckon he looks at it every day and gets 5mm closer to actually touching anything

[Froggy]

That's the way to go I reckon - mark it up and get the template perfect. Then have a few beers and cut it!

[Bounce_23]

Will get in touch with him and tell him to get the beers ready

Bloody sook, I reckon he looks at it every day and gets 5mm closer to actually touching anything

LOL. After looking at my Khumo's which havn't been used yet

[Bounce_23]

Come on bounce ya wuss! Slice up that quarter panel!

Yeah I know. It's not something I have looked forward to doing, hence the delay

[Bounce_23]

I recieved the hole saw kit back today

[big_bob_thefirst]

Hi bounce, PM sent. I'll get in the queue if there is one.

[trav587]

has anyone fitted a snorkel to their mn, my snorkel arrived and where it tells me to relocate the radiator overflow bottle, the power steering bottle is in the way. If someone could post pics up of the finsished product or give me any instructions, that would be great.
cheers

[Cowboy Dave]

Depends on the bottle they've sent you mate. The genuine safari bottle tucks between the air box and the drivers side guard. What size/shape do you have?

[big_bob_thefirst]

Hi, does anyone other than bounce have a hole saw kit or is there just one set in circulation?

[fridgie]

Hi, does anyone other than bounce have a hole saw kit or is there just one set in circulation?

I believe there is only 1 set going around, bounce will finally be doing his snorkel this weekend

Send him a pm and they will get sent afterwards

//just looked up and saw you already have

[big_bob_thefirst]

Ya, cheers fridgie. There's a queue after bounce, so just checking if there's another one out there.

Does anyone have the details of what hole saw? I might b able to get one from work...

[biggibbo]

has anyone fitted a snorkel to their mn, my snorkel arrived and where it tells me to relocate the radiator overflow bottle, the power steering bottle is in the way. If someone could post pics up of the finsished product or give me any instructions, that would be great.
cheers

Try this link mate - I did a set of instructions a while back.

viewtopic.php?f=85&t=12066

[Kegsy]

has anyone fitted a snorkel to their mn, my snorkel arrived and where it tells me to relocate the radiator overflow bottle, the power steering bottle is in the way. If someone could post pics up of the finsished product or give me any instructions, that would be great.
cheers

They have sent you an ml snorkel kit.

Either return it for an mn kit, or you might have to relocate the factory bottle or order an safari bottle kit.

I went through this drama myself, everything else was the same

[fridgie]

They are the correct size for Safari and Ironman kits.

I forget the sizes, didn't take too much notice. I THINK its 95 and 102? or 98 and 102... Something like that, either way perfect fit.

Your instructions have the sizes in the details.

From the first page

[big_bob_thefirst]

They are the correct size for Safari and Ironman kits.

I forget the sizes, didn't take too much notice. I THINK its 95 and 102? or 98 and 102... Something like that, either way perfect fit.

Your instructions have the sizes in the details.

From the first page

Ah schucks, I thought I read everything to look for it. Cheers fridgie. Colour me embarrassed...

[adamvchorek]

I believe I am next in line after Bounce, as soon as it arrives to my place once he is finished I will put the snorkel on straight away, there is someone after me though. Will post up who gets it next

[big_bob_thefirst]

Well, got my hands on the 102mm hole saw here in work. Is the 95mm needed for the internal or external hole?

Would it look massively wrong if u just used the 102 on both???

[fridgie]

Well, got my hands on the 102mm hole saw here in work. Is the 95mm needed for the internal or external hole?

Would it look massively wrong if u just used the 102 on both???

Just pay attention where the hole sits in relation to the flare and it should be fine, we ended up doing that on bounces triton and lined the hole with a bit of split tube. Looked good when finished.

[motoz]

I used a 102 on both sides of mine also with no probs.

[Bounce_23]

Have just posted the hole saw kit to adamvchorek.

[big_bob_thefirst]

Music to my ears guys. No need for hole saw so. I'll pm Adam and take my name out of the queue.

[adamvchorek]

The hole saws arrived at my place today, thanks Bounce_23 I will be installing it this week!