Show us your Switches

[c-dale]

Mine are from custom rockers. Made the switch plate from sheet steel folded and covered. Room for one more switch for the led light bar that I hope to get one day. Also has the iPod cable and uhf mount. Fits without needing any screws, just wedged in.

[RockoWallaby]

Forget I posted that. Read the rest of the thread ;>

[fish88]

Some of my switches mounted in the console.

[Cowboy Dave]

Nice work mate, very

[fish88]

thanks. next week ill load up a heap of photos of all the things ive done and a list.

[big_bob_thefirst]

That's awesome fish! That's similar to what I had in my head.

[fish88]

have a look next week bob in the members build up and you will see more photos of what ive done

[big_bob_thefirst]

Cool, will keep an eye out. I was thinking of a console too. Was going to put the switches facing downwards tho. How do u find the glare from having the switches at eye level?

[fish88]

well for me the switches arnt really at eye level so i dont notice the glare from them but if it did bother you, you could just put another switch in haha to turn of the lights in the switches.

[dan.batto]

Just installed this one this arvo!

[big_bob_thefirst]

Nice, is it just propped in or screwed somehow?

[dan.batto]

Wedged in nice an tight, I tried to give it a matte black finish but it looked verrrry bad! So I just adhesed some spare carpet on top one of the switched looks at a different level to the other as its not sitting in properly, just need to push it back better.

[timbo]

Here's mine

[motoz]

Here's mine

That's the benchmark right there. Great setup !!!

[salt36]

Very neat, is the 1.3 your fridge temp ?

[timbo]

Thanks mate Yeah the beer has to be nice and cold

[Harro]

G'day timbo, how u doin ? I'm with the other boys that is a great set up, good job. Harro

[srb]

Thanks mate Yeah the beer has to be nice and cold

Hay Timbo good work on your switches, I've started installing mine in the same spot, it's amazing how perfectly they fit hay just too easy.

[Mitsu0069]

Hi,
I finally worked out how to post some pics, so i decided to show you my switches, had inspiration from some of you guys, but i decided to go one better, 1 switch better that is , hope you guys like them. I bought the switch panel on ebay, the switch panel is in seperate sections that clip together with 2 end sections, 7 switches fit nicely in the spare slot. the switch panel is held in with screws as the panel would not clip in.
The winch isolator switch is wired to the motor ground wire, to cut the earth. I still need to wire up some led reverse lights.

Cheers

[Cowboy Dave]

Looks great.

[Chally]

That looks very neat!

Jeff

[motoz]

Hi,
I finally worked out how to post some pics, so i decided to show you my switches, had inspiration from some of you guys, but i decided to go one better, 1 switch better that is , hope you guys like them. I bought the switch panel on ebay, the switch panel is in seperate sections that clip together with 2 end sections, 7 switches fit nicely in the spare slot. the switch panel is held in with screws as the panel would not clip in.
The winch isolator switch is wired to the motor ground wire, to cut the earth. I still need to wire up some led reverse lights.

Cheers

Mate do you have a link for the switch panel?

[Mitsu0069]

Motoz,
Bought from 4x4offroadclinic
Just need to remember to get 2 ends as well as however many centre panels you need.
http://www.ebay.com.au/itm/DIY-ROCKER-SWITCH-HOLDER-CENTRE-FOR-CARLING-ARB-NISSAN-TOYOTA-4X4-80-GQ-GU-4X4-/140890426125?pt=AU_Car_Parts_Accessories&hash=item20cdb94b0d
Cheers

[Sharkey]

Cowboy Dave,

Hi Dave,

Are you able to help me out as to where I could track down the OEM light switch (for driving lights) which you have in your vehicle, the switch which is located right next to the 'ASC OFF' switch. Mitsubishi spare parts says it is only supplied as a whole lighting kit which they are asking around $450+, fat chance.

Thank you,

[Cowboy Dave]

Cowboy Dave,

Hi Dave,

Are you able to help me out as to where I could track down the OEM light switch (for driving lights) which you have in your vehicle, the switch which is located right next to the 'ASC OFF' switch. Mitsubishi spare parts says it is only supplied as a whole lighting kit which they are asking around $450+, fat chance.

Thank you,

Mate I'm afraid mine was not an OEM switch despite how it looks. One of the forum sponsors was trying to come up with a switch and they had two samples. Myself and another member grabbed them. It turned out they'd been made upside down. In the end they gave it away as unprofitable unfortunately.

Here are two switches that look like they might do the trick but I can't tell from the pics how you'd wire them in or whether they'll clip in properly:

http://www.ebay.co.uk/itm/RRP-50-MITSUBISHI-LANCER-EVOLUTION-SHOGUN-PAJERO-PININ-FOG-LIGHT-SWITCH-EVO-/370786563132?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item565499f43c

http://www.ebay.co.uk/itm/2001-MITSUBISHI-PININ-FRONT-REAR-FOG-LIGHT-SWITCH-/130888278143?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e798ca07f