Power line for tray/tub?

Power line for tray/tub?

Postby Headley on Mon Nov 12, 2018 5:48 pm

Hey guys,

Looking to wire in some LED strip lighting under the hard tonneau cover soon. Is there an available 12 volt supply there somewhere?

Can i tap the power for reverse lights?

Would it be best to run a line from the battery to the tray?

Also wanting to put a reversing camera in sometime soon as well so i'm thinking one power line for both would be good?
Headley
 
Posts: 163
Joined: Sat Mar 16, 2013 5:33 pm
Location: Mackay


 

Re: Power line for tray/tub?

Postby 4wd26 on Tue Nov 13, 2018 5:08 am

Might be worth running a positive negative fused line from the battery in big cable. You can than terminate into a fuse block and use this for anything you like in the future.

Easier to run one line than multiple small lines as you need

Just my thoughts, you may want to power a fridge or USB connectors in the future for example
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8280
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: Power line for tray/tub?

Postby RHKTriton on Tue Nov 13, 2018 6:54 am

Do a main bus direct from the battery with a fuse at the battery. I would also recommend a negative cable to reduce losses and help prevent any stray currents that could interfere with the vehicles electronics.
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4335
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Power line for tray/tub?

Postby mid080 on Fri Feb 01, 2019 10:57 pm

Hi, a bit late but I have installed the kings battery extension in the tub of my MN triton. Has pos & N ready to go in the tray for the fridge!!
mid080
 
Posts: 3
Joined: Thu Oct 11, 2018 8:12 pm


Return to Electrical

Who is online

Users browsing this forum: No registered users and 3 guests