Colour coded Wiring diagram for Wheel Control Unit

Colour coded Wiring diagram for Wheel Control Unit

Postby Tomo81 on Fri Jun 07, 2019 5:45 am

Hi,
I’m chasing a colour coded wiring diagram for the 10 wires that plug into
The Wheel Control Unit. It’s location is passenger footwell, beside heater fan motor.
It has MN171314V printed on module. I mistakenly pulled wrong plug, and the ten wires
Came out of there holder, now I don’t know which slot they all go in.
I’ve hunted around the site but couldn’t find a diagram with wire colours and locations within the plug.
Please any help would be greatly appreciated, even a photograph of loom going into plug, so I can clip it back in.
My triton is a December 2010MN Glxr twin cab , super select transfer

Thanks
Tomo81
 
Posts: 3
Joined: Thu Jun 06, 2019 10:32 am


 

Re: Colour coded Wiring diagram for Wheel Control Unit

Postby NowForThe5th on Fri Jun 07, 2019 6:56 am

Did you look in the Forum Directory, under 'Manuals (online)'?

All the information you need is in the Manual.

But I'm absolutely gobsmacked that you actually pulled 10 wires out of a plug! Seriously?
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Colour coded Wiring diagram for Wheel Control Unit

Postby RHKTriton on Fri Jun 07, 2019 8:05 am

This just once again suggests that many people should just leave stuff, they don't understand, alone.

Just this week I've had a 4x4 coming at me at night with a light bar on the roof permanently on, other car dipped the headlights and everything went dark!
Don't let the b'strds get you down!!
RHKTriton
Platinum Subscriber
 
Posts: 4732
Joined: Wed Jun 10, 2009 10:05 pm
Location: La trobe Valley - Gippsland

Re: Colour coded Wiring diagram for Wheel Control Unit

Postby Tomo81 on Fri Jun 07, 2019 10:22 am

I did look in the online manual, I couldn’t seem to find the wire colours, only the plug with numbers 1-10 on it.
I spent hours last night looking about here and googling without much luck, some guidance would be much appreciated.
Tomo81
 
Posts: 3
Joined: Thu Jun 06, 2019 10:32 am

Re: Colour coded Wiring diagram for Wheel Control Unit

Postby NowForThe5th on Fri Jun 07, 2019 12:48 pm

Really?

Here's just a random example of the wiring diagrams in the Manual.

Screenshot_2019-06-07_13-43-38.jpg


Every wire has the colour code printed next to the wire and there's a key at the bottom with the codes and the actual colours.

Every single diagram is the same.
You do not have the required permissions to view the files attached to this post.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Colour coded Wiring diagram for Wheel Control Unit

Postby Tomo81 on Fri Jun 07, 2019 5:30 pm

All sorted now.
It wasn’t Till I opened the manual on the computer that I could actually read the wire colours and numbers.

5 min fix with the right info
Tomo81
 
Posts: 3
Joined: Thu Jun 06, 2019 10:32 am


Return to Electrical

Who is online

Users browsing this forum: No registered users and 8 guests