Factory race pipe.

[Sky Miner]

Always said turbo flutter (dose) sounds like a pigeon with its head stuck in a pod filter.

Stick that in ya pipe and gunnit

[jab461]

Going to get the cat and muffler cut out tomorrow! So just straight through. Let ya's know how it sounds.

[Cowboy Dave]

I already know how it sounds - illegal

[jab461]

Going to get the cat and muffler cut out tomorrow! So just straight through. Let ya's know how it sounds.

Sounds pretty much stock! Although you can hear the turbo "whistle" a LOT better!

[ag9111]

Too right mate!.... I'll be ditching that idea!... Just wanted something different and loud

unifilter and scotts rods 3 inch with no exhaust. bout as load as you will get legally.

Need the same no of mufflers and cats as when it left the factory for it to be legal In NSW. Drop muffler and its illegal

[Tony]

Who needs dose pipes and race pipes? just take this dude with you.

Make sure you pack some water for him though.

http://www.youtube.com/watch?v=8ZkGL-HI ... re=related

[jab461]

Who needs dose pipes and race pipes? just take this dude with you.

Make sure you pack some water for him though.

http://www.youtube.com/watch?v=8ZkGL-HI ... re=related

[borngeek]

Going to get the cat and muffler cut out tomorrow! So just straight through. Let ya's know how it sounds.

Sounds pretty much stock! Although you can hear the turbo "whistle" a LOT better!

You only cut out the muffler? If you delete cat you will notice the difference.

//NOTE: All of this is illegal. Like AG9111 has said you need to ensure cat and muffler are installed. There are after market mufflers and cats of high flow that give a nice note on say a 3" system. Here is a noise to whet your appetite. You may even hear a little bit of "dose" although with a less restrictive panel filter it is much better.
http://imageshack.us/clip/my-videos/560/wx8i.mp4/ (this is with a K&N oiled filter)

here is the street filter info:
stainless steel re-useable 60micron filter . Not recommended for off road Dusty areas , Street/Strip Filter . (around $115 from chipit-forum sponsor)

4 (Small).jpg

[jab461]

Going to get the cat and muffler cut out tomorrow! So just straight through. Let ya's know how it sounds.

Sounds pretty much stock! Although you can hear the turbo "whistle" a LOT better!

You only cut out the muffler? If you delete cat you will notice the difference.

//NOTE: All of this is illegal. Like AG9111 has said you need to ensure cat and muffler are installed. There are after market mufflers and cats of high flow that give a nice note on say a 3" system. Here is a noise to whet your appetite. You may even hear a little bit of "dose" although with a less restrictive panel filter it is much better.
http://imageshack.us/clip/my-videos/560/wx8i.mp4/ (this is with a K&N oiled filter)

here is the street filter info:
stainless steel re-useable 60micron filter . Not recommended for off road Dusty areas , Street/Strip Filter . (around $115 from chipit-forum sponsor)

The CAT is goooone as well mate!....I am replacing the whole exhaust soon, just thought I'd do a bit of experiment work
I am tossing up against the Beaudesert and Scotts Rods system

4 (Small).jpg

[TUFF TROOP]

I'm running 3" stainless dump pipe into 3" mandrel bent exhaust all the way. No mufflers or cat converters in my ml 3.2 . The sound is to die for, had stock pipe with no mufflers and cat and didn't sound nice at all.

[jab461]

I'm running 3" stainless dump pipe into 3" mandrel bent exhaust all the way. No mufflers or cat converters in my ml 3.2 . The sound is to die for, had stock pipe with no mufflers and cat and didn't sound nice at all.

Mate good to know it'll sound better then what I got now!...
What brand of exhaust did you go for? Or did you just get a shop to put one on for ya?

[Cowboy Dave]

I thought he made his own one up?

[TUFF TROOP]

Yeah made my own up out of stainless! Took around 3 hours. Best mod ive done to it yet!

[trouble]

Any chance of some pics or vid of the sound??

[Mashine13]

Evening fellas, I've been contemplating this mod for a while so I finally took the rear section of my exhaust off in a trial to see if I could deal with the sound and it sounds like a tractor! I'm not too keen on cutting up my muffler if it's going to be obnoxious like it is.

Someone please tell me the good news that it's going to quieten down a little once I fit the rest of the pipe up! Plus I'm not getting the pigeon sound either...