Custom Bash Plates

Custom Bash Plates

Postby Buzzy on Sat Oct 04, 2008 9:30 pm

By popular demand here is the drg I did of my bash plates
I stuffed around for ages to try and make the pic bigger/clearer but stuffed if I could work out how :oops:
If you want it click here Bash Plate Drg
Thx to Trent (Austblue) for letting me measure up yours ;)

Ah yeh as an arse covering exercise I accept no responsibility if someone makes a set up of these drgs and they dont fit.
It was a real nightmare getting the pressing exactly right and if its not it will make it hard to fit. Thats why some people have had trouble fitting their aftermarket ones up.

Cheers

Click to view larger picture

Buzzy Bash Plates.pdf
You do not have the required permissions to view the files attached to this post.
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW


 

Re: Custom Bash Plates

Postby Sapient on Sun Oct 05, 2008 9:46 am

Top job Buzzy!! :)

Would you have the dxf file by any chance?
User avatar
Sapient
Platinum Subscriber
 
Posts: 473
Joined: Tue May 27, 2008 2:00 pm
Location: Gold Coast, QLD

Re: Custom Bash Plates

Postby Buzzy on Sun Oct 05, 2008 11:14 am

I drew it in DWG format sapient but I would rather not give that out, sorry :)
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby Sapient on Sun Oct 05, 2008 3:22 pm

I will take the pdf then thanks Buzzy ;)
User avatar
Sapient
Platinum Subscriber
 
Posts: 473
Joined: Tue May 27, 2008 2:00 pm
Location: Gold Coast, QLD

Re: Custom Bash Plates

Postby Buzzy on Sun Oct 05, 2008 6:40 pm

Not a drama :D
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby darren4570 on Tue Dec 02, 2008 1:13 pm

Hi Buzzy,

could you lick me the PDF, donutshop@iinet.com.au

Cheers
User avatar
darren4570
 
Posts: 14
Joined: Fri Nov 21, 2008 1:23 pm

Re: Custom Bash Plates

Postby Buzzy on Sat Dec 06, 2008 8:55 pm

Sent darren4570 ;)
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby dadz on Mon Dec 08, 2008 7:36 pm

hey bro if you dont mind can you send me the pdf too? thank's.
normandysamson@yahoo.com
Visit us:
www.triton4x4club.com - Thailand Club
www.stradaclubph.com - Philippine Club
dadz
 
Posts: 116
Joined: Wed Oct 15, 2008 12:51 pm
Location: Bangkok, Thailand

Re: Custom Bash Plates

Postby Sportero on Tue Jan 06, 2009 9:26 pm

Hi Buzzy,

could you send me the PDF file,

aramnarine@hotmail.com or Avinash.Ramnarine@caribbean-airlines.com

PS. I am coming to Australia hopefully next year hope i can meet up with some of you guys and trade Triton stories.
I am from all the way in Trinidad West Indies.


Cheers
Sportero
 
Posts: 55
Joined: Mon Apr 21, 2008 2:00 pm
Location: Trinidad, West Indies

Re: Custom Bash Plates

Postby Blue on Tue Jan 06, 2009 10:58 pm

I wouldn't mind a copy either - if it's still available...

blue_george@optusnet.com.au
Vegetarian - Ancient tribal slang for the village idiot that can't hunt or fish.
User avatar
Blue
Platinum Subscriber
 
Posts: 5618
Joined: Fri May 16, 2008 2:00 pm
Location: Ferntree Gully, VIC

Re: Custom Bash Plates

Postby Buzzy on Wed Jan 07, 2009 5:23 am

No worries blue I will get onto it tonight when I get home from this sh!t hole........................work! :x
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby darren4570 on Wed Jan 07, 2009 8:21 am

Sorry Buzzy didn't get thru
darren_roach@iinet.com.au
User avatar
darren4570
 
Posts: 14
Joined: Fri Nov 21, 2008 1:23 pm

Re: Custom Bash Plates

Postby Buzzy on Wed Jan 07, 2009 8:09 pm

Blue/darren,
I sent it to both of you tonight.
Let me know if you got it :)
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby Eelesy on Thu Jan 08, 2009 10:07 am

I just wanna point out that i am with iinet, and mine is --- @iinet.net.au --- not --- iinet.com.au

So that may be the issue??
I'm not dead
User avatar
Eelesy
 
Posts: 1403
Joined: Mon Oct 08, 2007 2:00 pm
Location: Craigie, WA

Re: Custom Bash Plates

Postby Buzzy on Thu Jan 08, 2009 11:30 am

Thx Tritonasaurus.
Thats maybe whats happening.
I will resend to him tonight. ;)
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby darren4570 on Fri Jan 09, 2009 10:40 am

Tritonasaurus wrote:I just wanna point out that i am with iinet, and mine is --- @iinet.net.au --- not --- iinet.com.au

So that may be the issue??


Yea makes no difference 'Tritonsaurus' if it's .net or .com still gets thru, been with iinet for about 4-5 yrs when I first signed up it was .net then overnight it changed to .com they never let us know of the change. But have noticed that emails with attachments sometimes get lost !!
You can test it by sending yourself an email @iinet.com.au or @iinet.net.au both will get thru.
Last edited by darren4570 on Fri Jan 09, 2009 10:43 am, edited 1 time in total.
User avatar
darren4570
 
Posts: 14
Joined: Fri Nov 21, 2008 1:23 pm

Re: Custom Bash Plates

Postby darren4570 on Fri Jan 09, 2009 10:42 am

Buzzy wrote:Thx Tritonasaurus.
Thats maybe whats happening.
I will resend to him tonight. ;)


Came Thru last night X 2, Thanks Buzzy.
User avatar
darren4570
 
Posts: 14
Joined: Fri Nov 21, 2008 1:23 pm

Re: Custom Bash Plates

Postby brent18 on Thu Jan 29, 2009 1:54 pm

Looks great!!
would you mind sendin a copy to me :)
brent_capital@iinet.net.au

thx buzzy
User avatar
brent18
 
Posts: 7
Joined: Tue Jan 20, 2009 11:24 am
Location: Jane Brook WA

Re: Custom Bash Plates

Postby Buzzy on Thu Jan 29, 2009 8:20 pm

Its on its way brent :D
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby Jitsukablue on Fri Jan 30, 2009 11:19 am

What about mine Buzzy, I'm sure I sent a PM...
He who dies with the most toys, wins
It's not the size of the dog in the fight that matters...
User avatar
Jitsukablue
 
Posts: 1211
Joined: Fri Jan 18, 2008 3:00 pm
Location: Vic Park, WA

Re: Custom Bash Plates

Postby Buzzy on Sat Jan 31, 2009 6:57 pm

Jitsukablue
Can you PM me your email address again please mate, not sure what I did with it before.... sorry :oops: :oops:
User avatar
Buzzy
Valued Contributor
 
Posts: 4220
Joined: Mon Oct 08, 2007 2:00 pm
Location: Hunter Valley, NSW

Re: Custom Bash Plates

Postby Sindo Fernandez on Mon Mar 23, 2009 9:28 am

Hey Buzzy

If you dont mind i would like you to send me that bashplates pdf, i´m from Venezuela and i dont find any aftermarket bashplates here, i already had to fix my original ones several times so it wolud be a great help, thanks... (sindomen@hotmail.com)
Sindo Fernandez
 
Posts: 1
Joined: Fri Nov 28, 2008 9:37 am
Location: Venezuela

Re: Custom Bash Plates

Postby MR T on Mon Mar 23, 2009 9:10 pm

hi buzzy
if your still handing them out id love a copy thanks
im at bryan@bettanet.net.au
thanks agian youve helped us all out heaps
a smile is a sign of joy, a hug is a sign of love, a laugh is a sign of happiness and a friend like me...well...that's a sign of good taste.
User avatar
MR T
 
Posts: 896
Joined: Mon Feb 09, 2009 3:49 pm
Location: brighton adelaide

Re: Custom Bash Plates

Postby Dylan 191 on Mon Mar 23, 2009 10:13 pm

buzzy doest mind hes only done it like 50 gazillion times :lol:
Marge bring me your address book ,4 beers and my conversation hat !!
User avatar
Dylan 191
 
Posts: 1241
Joined: Tue Jan 20, 2009 1:17 pm
Location: Perth , WA

Re: Custom Bash Plates

Postby joshrobbo on Wed Apr 01, 2009 9:26 pm

Hey Buzzy,

I would appreciate a copy of the plates.
I'm at joshuarobinson@bigpond.com

P.S, Have you designed a Transmission plate?

Cheers.
joshrobbo
 
Posts: 1
Joined: Sun Nov 16, 2008 10:00 pm

Next

Return to Tips & Tricks

Who is online

Users browsing this forum: No registered users and 5 guests