WIP Wheel offset bible

Need something to get you rolling?

Re: WIP Wheel offset bible

Postby NowForThe5th on Fri Mar 16, 2018 9:37 am

NowForThe5th wrote:That could be interesting. Can you take a video of trying to fit a wheel with 4 or 5 holes with a spacing of 114.3mm to a Triton with 6 holes in a diameter of 139.7mm?


It's ok. Apparently there is a solution...............

pcd.png
You do not have the required permissions to view the files attached to this post.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9240
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT


 

Re: WIP Wheel offset bible

Postby Joel on Fri Mar 16, 2018 1:51 pm

How did they fill in the old holes? :lol:
I only drink on days starting with T... Today and Tomorrow
Joel
 
Posts: 835
Joined: Wed Feb 19, 2014 4:56 am
Location: canberra

Re: WIP Wheel offset bible

Postby abaser666 on Mon Apr 16, 2018 9:42 am

NowForThe5th wrote:If you're talking about the centre bore then there are rings available which adapt the size of your wheel to that of the hub. If the size of the hole in the wheel is smaller than that needed then it can (usually) be machined out to suit.

The Triton is hub-centric, so the wheel, or the adapting ring, must fit exactly on the hub in order to maintain centring of the wheel.


Hi there - I have a couple of questions in this vein:
a) Will I need adapter rings for a Prado wheel (Dynamic Sunraysia style)
b) Where does one find said adapter rings, or do you need to get them custom from a fab shop?

Cheers!
abaser666
 
Posts: 8
Joined: Thu Aug 21, 2008 11:55 pm

Re: WIP Wheel offset bible

Postby NowForThe5th on Mon Apr 16, 2018 9:47 am

abaser666 wrote:a) Will I need adapter rings for a Prado wheel (Dynamic Sunraysia style)
b) Where does one find said adapter rings, or do you need to get them custom from a fab shop?


a) Yes.
b) Most sizes are on Ebay
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9240
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: WIP Wheel offset bible

Postby abaser666 on Mon Apr 16, 2018 9:55 am

Thanks for the quick reply - I just looked up the centre bore numbers...um yeah. Like quite a big difference.

I'll check ebay...

thanks for the Tip.

cheers
abaser666
 
Posts: 8
Joined: Thu Aug 21, 2008 11:55 pm

Re: WIP Wheel offset bible

Postby 98kellrs on Mon Apr 16, 2018 11:49 am

My understanding, and I'm quite happy to be told otherwise by someone more informed is that while yes the Triton (and most other cars) are hub-centric with stock wheels and wheel nuts you can run them without adapter rings by:

1- Balancing the wheel off the stud holes instead of the center bore
2 - Using cone ended wheel nuts instead of the OEM ones (see pic below)

Click to view larger picture
User avatar
98kellrs
 
Posts: 60
Joined: Sun Mar 26, 2017 11:40 am
Location: Perth, Western Australia

Re: WIP Wheel offset bible

Postby srb on Mon Apr 16, 2018 12:49 pm

For most people It's probably good practice to use hubcentric adapter rings, especially if you leave it up dealerships, dodgy mechanics and tyre shops to service your vehicle, they may not realise the importance or take the care to properly let the wheel nuts centre the rim correctly.

This happend to a friend of mine about 6 months ago, he has non hubcentric wheels and his mechanic didn't centre the wheel correctly, he lost the rear wheel doing 80kph! Luckily nobody was hurt.

However if you're the only one that touches your vehicle and are aware of properly centering the rim, then there will be no reason to use hubcentric rings. I've been using non hubcentric rims with no adapters for years, without any problem.

Sent from my E5823 using Tapatalk
TO SEE HOW TO HAVE A TRIP OF A LIFE TIME v
http://www.exploroz.com/Members/281229. ... x#mptabs=2
http://www.flickr.com/photos/exploroz/

Only those who will risk going too far can possibly know how far they can go.
User avatar
srb
Platinum Subscriber
 
Posts: 1737
Joined: Sun Feb 06, 2011 6:10 pm
Location: Sydney

Re: WIP Wheel offset bible

Postby 98kellrs on Tue Apr 17, 2018 6:37 am

Thanks for the clarification, Chris had me worried there for a bit!
:D
User avatar
98kellrs
 
Posts: 60
Joined: Sun Mar 26, 2017 11:40 am
Location: Perth, Western Australia

Re: WIP Wheel offset bible

Postby NowForThe5th on Tue Apr 17, 2018 9:35 am

I think that the key thing is what srb said about not using the adaptors being ok only if you can be sure that anyone touching your car will properly centre with the nuts. Given that most members here can't guarantee that I'll always recommend use of the rings on a better safe than sorry basis.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9240
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: WIP Wheel offset bible

Postby 98kellrs on Tue Apr 17, 2018 1:09 pm

NowForThe5th wrote:I think that the key thing is what srb said about not using the adaptors being ok only if you can be sure that anyone touching your car will properly centre with the nuts. Given that most members here can't guarantee that I'll always recommend use of the rings on a better safe than sorry basis.


Makes sense and totally agree with that approach and he basis for giving the advice you did. I was more just worried that I'd been doing something dangerously wrong for years and that my wheel was going to suddenly fall off :lol:
User avatar
98kellrs
 
Posts: 60
Joined: Sun Mar 26, 2017 11:40 am
Location: Perth, Western Australia

Re: WIP Wheel offset bible

Postby NowForThe5th on Tue Apr 17, 2018 2:49 pm

Are you sure that it won't? :P
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9240
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: WIP Wheel offset bible

Postby 98kellrs on Tue Apr 17, 2018 4:07 pm

Thankfully working on the mines I've had a wheel fall off the work landcruiser before thanks to shoddy workmanship, so I know what they feel like when they're off-center! :lol:
User avatar
98kellrs
 
Posts: 60
Joined: Sun Mar 26, 2017 11:40 am
Location: Perth, Western Australia

Re: WIP Wheel offset bible

Postby hogget on Sat Feb 02, 2019 7:42 am

will late model ranger wheels fit an mq triton?
same pcd, but ranger offset is +55mm vs the tritons +38mm
concerned that the ranger wheels may rub on the suspension or something else
hogget
 
Posts: 3
Joined: Wed Feb 14, 2018 11:54 am

Re: WIP Wheel offset bible

Postby NowForThe5th on Sat Feb 02, 2019 8:37 am

The only way to be sure is to try.

I think it's more likely that they'd foul the brake calipers.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9240
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: WIP Wheel offset bible

Postby 4wd26 on Tue Feb 05, 2019 7:50 am

the ford rims do fit the triton BUT and it is a big BUT

this will move the rim and tyre inward which is ilegal, and will look funny.

you can increase the track width- but you must not reduce it.
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby Crash486 on Tue Apr 09, 2019 8:14 am

Understand now why Wheel spacers can be a real problem...
https://www.youtube.com/watch?v=5K-I_-4IKyM&feature=youtu.be
User avatar
Crash486
 
Posts: 1591
Joined: Tue Jan 11, 2011 7:19 pm
Location: Blue Mountains, NSW

Re: WIP Wheel offset bible

Postby gfirth77 on Wed Apr 10, 2019 12:18 pm

I have had nothing but issues with mine so i bought some hub rings. They did help, but also my tyres were crappy comforsers. To suit the steelies I got ID=67.1 and OD=110. I have since changed to alloys which were also a 110 bore so i used the same rings.

Click to view larger picture
gfirth77
 
Posts: 9
Joined: Thu Jun 05, 2014 6:57 pm

Re: WIP Wheel offset bible

Postby lukeyboy2014 on Tue May 14, 2019 5:13 pm

hey just brought some 16x8 with off set off +0 for my MR that arrives next week .i put them on my mn just to see what they looked like and stick out quite abit like 50mm hope they have sold me the right offset anybody have any info on the new model off set

Sent from my SM-G960F using Tapatalk
User avatar
lukeyboy2014
 
Posts: 67
Joined: Mon Jun 29, 2015 5:06 am

Re: WIP Wheel offset bible

Postby 4wd26 on Wed May 15, 2019 5:26 am

the MR with the solid flares might not cover the tyres as well as the clip on factory flares we have seen in the past

MR still has the standard +38 offset
You do not have the required permissions to view the files attached to this post.
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby lukeyboy2014 on Wed May 15, 2019 8:13 am

4wd26 wrote:the MR with the solid flares might not cover the tyres as well as the clip on factory flares we have seen in the past

MR still has the standard +38 offset
oh shit just droped over 2k with the wranglers on them they suggested that 0 offset will work .just emailed them as they where and online job

Sent from my SM-G960F using Tapatalk
User avatar
lukeyboy2014
 
Posts: 67
Joined: Mon Jun 29, 2015 5:06 am

Re: WIP Wheel offset bible

Postby XGRUMPIG on Thu Aug 13, 2020 9:23 pm

dos anyone know if 15 x 8 et0 fits ML triton ?
XGRUMPIG
 
Posts: 14
Joined: Tue Jun 09, 2020 3:14 pm

Re: WIP Wheel offset bible

Postby 4wd26 on Sat Aug 15, 2020 5:31 pm

Most likely not with that offset. Believe -12 or -22 can work with the 15” rims depending on rim type/ shape
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby XGRUMPIG on Mon Aug 17, 2020 11:06 pm

4wd26 wrote:Most likely not with that offset. Believe -12 or -22 can work with the 15” rims depending on rim type/ shape


Cheers thanks :)
XGRUMPIG
 
Posts: 14
Joined: Tue Jun 09, 2020 3:14 pm

Re: WIP Wheel offset bible

Postby FQCODEL on Mon Apr 12, 2021 9:01 am

Whats the largest factory diameter offered by Mitsubishi for these tritons? I can see rim sizes but cant see any factory tyre options mentioned anywhere.
FQCODEL
 
Posts: 28
Joined: Sun Apr 04, 2021 9:19 am

Previous

Return to Tyres & Wheels

Who is online

Users browsing this forum: No registered users and 1 guest