Random Suspension Questions

Re: Random Suspension Questions

Postby NowForThe5th on Wed Jun 03, 2020 7:23 am

Gazz82h wrote:its not quite wat i want height wise ..


It's a bit difficult to give you suggestions/recommendations without knowing what you want to achieve, and why.

So, what do you want? Why?
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 8839
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT


 

Re: Random Suspension Questions

Postby srb on Wed Jun 03, 2020 9:45 am

Best to speak to a suspension specialist so you can match new spring rates to your OME shocks and your load carrying needs... No good guessing as you're likely to make it handle like poo.

If you're wanting to put 33s on then you're going to have to lift it to the maximum 50mm and also remove front mudflaps. You will need to get this engineered and approved if you want your vehicle roadworthy/ legal. Totally not worth it in my opinion, but some people think so.

Sent from my SM-G970F using Tapatalk
TO SEE HOW TO HAVE A TRIP OF A LIFE TIME v
http://www.exploroz.com/Members/281229. ... x#mptabs=2
http://www.flickr.com/photos/exploroz/

Only those who will risk going too far can possibly know how far they can go.
User avatar
srb
Platinum Subscriber
 
Posts: 1662
Joined: Sun Feb 06, 2011 6:10 pm
Location: Sydney

Lift for the 2015 MN

Postby snowline on Fri Jul 03, 2020 2:45 pm

Hello all, I'm looking at getting a 2' lift. Leaning towards the Dobinsons kit or Fulcrum. (Australian made) Will do the upper control arm too. Recommendation of upper control arm brand?

Any feedback on either is appreciated. I just want to get it installed and have no problems. Do I need extended brake lines front and rear?

Any advice or warnings of things to avoid or not do also appreciated.

Thanks
snowline
 
Posts: 5
Joined: Sat Jul 25, 2015 3:10 pm

Previous

Return to Suspension

Who is online

Users browsing this forum: No registered users and 1 guest