MY15 GLX-R Build up

[Bobojo]

Cheers lunny, have u done this on your mn my 15? As it ses resister values are wrong for a mn ?!

[Bobojo]

First post no1. In red writing

[Cowboy Dave]

Easier to buy it from Tony who will send you the bits you need and with the resistance set at the best value for your model.

[GLX-RSilver]

If Tony's was a plug in play kit instead of a splice kit I would of brought one. Shame no one does a kit like the power modules which just plug in.

[GLX-RSilver]

My bull Bar is slowly coming along
.


Just wondering has anyone used Plasti Dip? as I'm thinking of either painting it with that or getting is colour matched in 2 pak

[c-dale]

Silver, I have Plasti-Dip on my flares and its worked a treat. Tried it on the alloy canopy and it failed miserably. Personally, I think paint or powdercoat is the go for the bullbar.

[Cowboy Dave]

If Tony's was a plug in play kit instead of a splice kit I would of brought one. Shame no one does a kit like the power modules which just plug in.

He was actually looking at having plugs made in China. Not cheap. Then then Chinese lost one of the sample plugs - which were not cheap to source in the first place.

The current method involves one snip and 2 crimps. Comes with all the connectors and even the electrical tape you'll need to tidy it up.

[alian]

If Tony's was a plug in play kit instead of a splice kit I would of brought one. Shame no one does a kit like the power modules which just plug in.

It is one of the easiest mods I have done, and can be put back to std in no time or you can splice in a switch so you can switch it off and on.
Cheers Ian

[GLX-RSilver]

Finally the bulbar is fitted.






Scary Time cutting the factory bumper








Nearly done



Next is to fit the driving lights and front indicators

[Cowboy Dave]

That gap between flare and bar needs to be bigger if you're heading Offroad or your bar will pop the flares off.

[GLX-RSilver]

Yeah I know Dave just haven't fully adjusted it yet. once I fitted the lights and indicators then i'll finish adjusting it

[Cowboy Dave]

Yeah fair enough, it just sort of jumped out at me when i saw the picture.

[GLX-RSilver]

But most likely im going to get another bullbar as I know really like the look of this one. Another expensive job

[TritonNick]

Nice build up mate! how are you finding your chip? any dramas? i know you've only had it in for a little while but very interested in getting one.

[Bobojo]

Resistor soldered in place I hope I did it right

Shrink wrapped

Hey did this reisistor mod work? If so what size resistor is it the 6k8 ?

[L200Shogun]

...snip...

Hey did this reisistor mod work? If so what size resistor is it the 6k8 ?

If you have to ask?????

Two threads to get you started
viewtopic.php?f=39&t=2477
viewtopic.php?f=18&t=15856&hilit=wire+resistor
there are more

[Bobojo]

Yeah I do have to ask as most the info is on the ml and nothing on the mn, just looking for some one with the scan gauge with the mod on a mn too see if it is the same as the ml resistances

[Cowboy Dave]

The same resistor has been reported as working but a lower value will also work.