Jacobie's 2013 MN GLX-R

Want to show off what you've done to your rig? or have a custom project to show? Post it up here!

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Mon Jan 09, 2017 9:51 am

Somewhat of a big update... I finally got my snorkel on which is the latest big mod for me. The tray is still in progress however it's nearing completion, just making minor changes and deciding a few last minute modifications on the tray.

The Snorkel was done by Nathan at Fabulous Fabrications in Rocklea, he did an excellent job. Fabbed, powder coated and fitted for (what i think is) an excellent price.

Click to view larger picture

This pic is a little outdated, as the tray sits in the shed at the moment, It's got the headboard and mudguards on. Just need to get the checker plated steel to chuck on the rear, bed and headboard, fit the lights and add some mud flaps and drop down sides and it will be complete.

Click to view larger picture

Click to view larger picture

Finally, my snorkel was fitted. Very happy with the outcome, took it to the local to do a few river crossings and play around. Loving the sound it makes :lol: :lol:

Can't forget the New Triton sticker either. 8-)
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD


 

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Tue Feb 07, 2017 1:41 pm

Update on the tray.
My brother has been doing some more work on the tray and there isn't much longer to go. Just the last of the sheet stuff and wiring of the lights and it should be all done. I'm currently torn on what I would like to do when it comes to canopy's and tie down points. I've gotten a lot of idea's from the forum and other sources but can't decide on what I want.

At this point I would like tie down points (long tube bar) from the rear to the back of the mudguard underneath the tray. This will then limit what i can tie down in line or in front of the mudguards. I was thinking eyelet style tie down points in that area.

I also would like drop down sides for when I need to chuck fiddly things on the back. Not entirely sure where I can get some, I would probably need some custom ones for the size of the tray.
Lastly, I'm unsure of what I want and how I want a toolbox and storage box bolted on so I can house my Second battery and gear etc...

They tray as it sits today:
Click to view larger picture

Click to view larger picture

Click to view larger picture

I have also had an idea to have a rear headboard set up so I can have a canvas canopy type setup with Tire carrier on the back. I'm a fan of the idea however not sure how I would have it set up. Might look into putting a canopy box on and polt/clip it down.

Any suggestions are welcome!
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby snakesoup on Tue Feb 07, 2017 3:44 pm

how wide Is the tray ? your guards are poking way out
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Wed Feb 08, 2017 7:38 am

The tray is 1450 x 1650 (yes that is L x W). I'm aware they are poking out, drop down sides will still work, more so for holding things in the tray. If I don't need them ill take them off.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby snakesoup on Wed Feb 08, 2017 3:23 pm

why so skinny ? mines 1700 ish and I thought that was skinny!!
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: Jacobie's 2013 MN GLX-R

Postby snakesoup on Wed Feb 08, 2017 3:24 pm

sorry I misread that, 1650 wide, but still you must be running some wild offset rims?
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Thu Feb 09, 2017 7:41 am

Nah not really, only 0 offset with 265's. when the tray is on the wheels are inside the guard by about 5mm or so. I was going to cut the guards down to make them flush or have the wheels stick out 5mm but didn't bother.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Minza on Thu Feb 09, 2017 12:49 pm

Nice work mate, it'll look sweet once it's all sprayed up. 8-) would there be much weight difference between that and the standard tub?
Minza
 
Posts: 110
Joined: Mon Oct 10, 2016 4:58 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Thu Feb 09, 2017 1:12 pm

Minza wrote:Nice work mate, it'll look sweet once it's all sprayed up. 8-) would there be much weight difference between that and the standard tub?



Cheers Minza, I'm very keen to get her on.
At one stage it was similar weight to the tub, however as more goes on it gets heavier and heavier. The tub can be lifted and moved around with myself and my dad, so can the tray. However the tub to lift on and off is a pain in the ass (i've done it 3 times now). I'd say once all the sheet goes on and it gets painted and finished it will be considerably heavier then the tub.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby tacticaltriton on Thu Feb 09, 2017 2:02 pm

And considerably harder to damage. :D
User avatar
tacticaltriton
 
Posts: 171
Joined: Wed Mar 11, 2015 12:22 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Thu Feb 09, 2017 2:45 pm

tacticaltriton wrote:And considerably harder to damage. :D



Haha yes another plus side to the steel tray. I probably should have used aluminum sheet for the bed, rear and headboard but decided on steel.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jason91 on Tue Mar 14, 2017 12:35 pm

How do you find the stainless snorkel mate, after seeing yours I'm deeply considering
Jason91
 
Posts: 125
Joined: Thu Jul 17, 2014 10:10 pm
Location: Sunnybank, Brisbane

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Tue Mar 14, 2017 1:51 pm

Jason91 wrote:How do you find the stainless snorkel mate, after seeing yours I'm deeply considering


Absolutely love it mate.

Probably my favorite mod so far. Sounds sweet and is completely sealed. I highly recommend getting it done by Fabulous Fab. He's a top bloke and the quality is second to none.

For basically the same cost as the ARB rubber snorkels too. He can also fab stainless air boxes for a few hundred extra, which I'm looking into myself.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jason91 on Tue Mar 14, 2017 2:00 pm

Nice , will definitely look into it. You coming on the trip ?
Jason91
 
Posts: 125
Joined: Thu Jul 17, 2014 10:10 pm
Location: Sunnybank, Brisbane

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Tue Mar 14, 2017 2:04 pm

Jason91 wrote:Nice , will definitely look into it. You coming on the trip ?



Yeah mate looking into it. Hopefully I'll have my tray on by then :D
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Mon May 08, 2017 10:52 am

After almost a year, the tray is almost ready to go on. Currently has 1 coat of paint on it. Just need to do another coat or two and paint the Tie down points Fluro Green. :mrgreen:

After that, ill be looking at upgrading to 285/75/16 or 305/70/16 and maybe some jungle flares on the front.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Thu May 11, 2017 10:09 am

This is how the tray is looking. I've got plans for bolt on toolboxes and some drop down sides. But for now this will be what's going on.

I've got a space case i'll be bolting on with my battery and other gear in there. I'll either be looking at getting an ally canopy, deck box or keep the space case.

Click to view larger picture
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Sun May 14, 2017 7:01 pm

We're finally on. Although I can't drive it until tomorrow afternoon because i forgot to buy mudflaps today. Got led load resistors and even reused my camera ... Pretty stoked.

Next will be sides and toolbox. Click to view larger pictureClick to view larger picture
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Minza on Sun May 14, 2017 7:24 pm

Well done mate 8-) looks the goods, long time in the process but well worth it in the end by the looks of it ;)
Minza
 
Posts: 110
Joined: Mon Oct 10, 2016 4:58 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Mon May 15, 2017 7:37 am

Minza wrote:Well done mate 8-) looks the goods, long time in the process but well worth it in the end by the looks of it ;)

Thanks mate, super stoked. Just in time for my trip to double island too.

Sent from my MHA-L09 using Tapatalk
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Mon May 22, 2017 11:24 am

Went up to Double Island for the weekend, first time using the new tray to transport gear. Went really well with the tiedown point placements. Click to view larger pictureClick to view larger pictureClick to view larger pictureClick to view larger picture
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby snakesoup on Mon May 22, 2017 5:35 pm

looks good mate, did your rear tyres touch the guards at all? look quite close in the second last picture
User avatar
snakesoup
 
Posts: 1115
Joined: Sun Feb 02, 2014 2:24 pm

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Wed May 24, 2017 7:55 am

snakesoup wrote:looks good mate, did your rear tyres touch the guards at all? look quite close in the second last picture


It does look pretty close, but had a look when it flexed and it had plenty of room.
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Tue Aug 29, 2017 11:52 am

Update on the tray.
First pick is the setup I'm currently going for (cylinder is my huge ass swag).

The tray sides were off a single cab so hung over the end a fair bit, but have now been shortened and the ends fixed up ready to be put on. Just need a lick of paint.Click to view larger pictureClick to view larger pictureClick to view larger picture

Sent from my MHA-L09 using Tapatalk
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

Re: Jacobie's 2013 MN GLX-R

Postby Jacobie on Sun Sep 03, 2017 8:38 am

The day has finally come were I've finished my tray (for now) I have a few ideas for the future but for now it's done. Stoked on the outcome and spent a fraction of the cost of a store bought one. The paint jobs a little rough on the sides but will give them some love later on.Click to view larger pictureClick to view larger picture

Sent from my MHA-L09 using Tapatalk
2013 MN GLX-R

Build Thread: Jacobie's 2013 MN GLX-R
User avatar
Jacobie
 
Posts: 399
Joined: Thu Dec 17, 2015 7:15 pm
Location: Ipswich, QLD

PreviousNext

Return to Member Build Ups

Who is online

Users browsing this forum: No registered users and 1 guest