Custom made X Rok Bars

[MUD LARK]

Hi Tritoneers,
Just got some pics of my new custom made X Rok bars, with a new front grill. I am also, getting rock sliders with steps and rear bumper / wheel carrier made up. With all this steel works being done, that's including primed and colour coat to your own vehicle, the price is reasonably cheap and I mean cheaper than to get done in OZ and what you save will most probably pay the freight cost and with change!!!
The guy that's making it, is a guru, he has his own extreme offroad course on the same property as his work shop. He participates in local extreme offroad events for over 10 years, well knowledgable in any off road vehicles, mechanically, suspensions and fabricating to anything!!
I haven't seen the finish product yet, only from these pics, as I am still working away in OZ but due to get home at the end of this month, but so far I am pretty stoked !!
He designed the front grill & bars, so if any of you guys are interested, PM me and I will pass on his email address and you can ask away to your desire!!

Cheers,
Mud Lark

[salt36]

That is one tough looking bar !

[Blue]

Looks good but VicRoads/RTA/QLD TPT etc would have a field day with that - not to mention Harold Screwball...

[clarke-glxr]

there is a actual xrox bullbar produced i have a photo of it have to upload, first one in australia tro be on a triton saw it at the adrelanin 4x4 coast rocks looks sick contemptplating whether to get one

[daryn]

there is a actual xrox bullbar produced i have a photo of it have to upload, first one in australia tro be on a triton saw it at the adrelanin 4x4 coast rocks looks sick contemptplating whether to get one

kwyjibo here has one, hanging for pics to go up as install was today.

[jop]

Check the current ormeau thread - pic of 1 there

[fridgie]

Have taken a heap of pics today, will be uploading them soon and I think Kwyjibo will be doing a writeup of the install when he gets a chance.

[Homer]

^^^ Will he mention the 'oops' grinding incident before he even got started....maybe it will start like "Instructions....Firstly, don't turn on the grinder, walk to the front of the car and then turn around to your mates and say..I might start...oooh shit....you didn't see that"

Tritons should have a vent hole for the headlights anyway

That's a tough looking bar mud lark..is that the old washer bottle I can see near the wheel?

Might cop a knock on entry angle?

[MUD LARK]

Yes, the water bottle is exposed & the plastic guard as well on the left,looking at it from the front, the guy's going to cover both sides with metal sheets!! I will look more into it when I get home!!

[Homer]

Kwyjibo's bar came with a plastic bag style washer bottle with a pump motor pre attached so he can remove the washer bottle completely. Might be an option?

I think Jop has a washer bottle from a Pajero that fits inside the inner guard too if you wanted other options

Kwyjibo also cut the inner guards off on both sides so it's not there at all...looks good and gives heaps of front clearance.
It would be worth having a look at his thread (that he is probably going to post today) for a couple of ideas in that area

[MUD LARK]

To described in one word, the aggressive appearance, the one of a kind & the functionality!!
"AWESOME"!!
Finally got the bar fitted yesterday and the picture tells the story...(Will post pics soon)
The guy that designed/fabricated/painted & installed knew exactly what I was after!!
After a long searched of what I wanted in a front bar and then describing what I wanted, the final result is...
To top it off, the cost is relatively cheaper than any bull/Xroc bars in OZ!!

[Joe]

Hurry up with the pics MUD LARK

[MUD LARK]

Really sorry, can' seem to crop to required size

[sam]

WHERE'S THE PICS THIS THREAD IS NOOOOO GOOOOD WITHOUT PICS........

[fridgie]

Pics or ban!!!!

[MUD LARK]

S*&%, Geezzzz, having trouble resizing pics, it says " Required quota completed!!!

[MUD LARK]

Can any of you guys help me please? Can't seem to resize required pics on this forum..Don't know the problem, could be my bloody pc is RS!!!

[sam]

I do all my stuff through "photo bucket" as everthing is there to resize etc

[MUD LARK]

sam,
Can you download this "photo bucket"? I have used the resizing software from this forum before and only now it seems to have some problems.
Please be patient guys, am doing my best to have pics soon, again with sincere apologies!!

Sorry this wasn't done with intent...I hope this works guys, here are the pics...

It saying "Sorry, the board attachment quota has been reached. What this all mean?? Grrrrrrr

[kwyjibo]

To jump on the bandwagon.... I demand a photo!!

Dave should create an option to post up photos in all their uncompressed glory

[Joe]

MUD LARK go to www.photobucket.com and create an account to post up pics. Once you have pics in there copy and paste the IMG code of the pic you want to use in the post. Hope that helps

[fridgie]

I was having the same issue the other day, think it is more to do with dave's server or something but links to host sites like photobucket still work, will wait patiently for you to get the pics up

[MUD LARK]

Just completed the install of WF Catch can.
Since, there is NO space between the dual batteries & the brake booster,
I decided to install the filter behind the top side of the air filter & attached it there,
siliconed the 2 x bolts, connected the hoses and it's all sorted!!!
It's a fair distance to the turbo and I am happy with the location

[MUD LARK]

WTF? Just finished posted above pics and all my previous pages are GONE!!
It's been awhile since I updated my profile, I don't know what happened here?
Can any admin guys help me out here please? Hope it gets sorted...

[helicoptercow]

PM Daryn or Dave mate and bring their attention to it. Hopefully there's a back up of the first pages somewhere they can restore from.