Cobra 4x4 winch compatible Nudge bar

Bull bars, sliders, wheel carriers etc!

Cobra 4x4 winch compatible Nudge bar

Postby MtMarthaDan on Fri Apr 26, 2019 2:04 pm

Does anyone have one of these bars? If so, could you post some images and comments about them?

https://www.ozbestdealz.com.au/nudge-ba ... ible-suits
MtMarthaDan
 
Posts: 4
Joined: Fri Jul 08, 2016 8:14 am


 

Re: Cobra 4x4 winch compatible Nudge bar

Postby twig on Fri Apr 26, 2019 2:49 pm

Is it just me or is there no way those tiny mounting plates would take anything like the loading of a winch recovery, let alone snatching from those eyelets on the front?

I'm assuming this is "winch compatible" in as much as you can bolt a winch to it but that's about it.

I'm also looking for a minimal winch mounting option for my MN. So far the best option I've seen is Bill's "wingless" Xrox install.
twig
 
Posts: 13
Joined: Tue Oct 15, 2013 11:42 am

Re: Cobra 4x4 winch compatible Nudge bar

Postby thebertster on Thu May 16, 2019 2:53 pm

Hi Guys,
I'm also on the hunt for a solid nudge bar for my MN Triton. I don't want a full Roo bar, just a nudge bar, but want it to be solid, winch compatible, and, don't want to modify body work.
Can someone put me in touch with Bill re his Xrox bar?
Are there any other options?
Thanks
thebertster
 
Posts: 2
Joined: Fri Mar 09, 2018 7:43 am

Re: Cobra 4x4 winch compatible Nudge bar

Postby NowForThe5th on Thu May 16, 2019 5:27 pm

You'll need a few more posts before you can initiate PMs. Once you have these under your belt, feel free to send Bill a PM, yourself.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: Cobra 4x4 winch compatible Nudge bar

Postby Crash486 on Thu May 16, 2019 5:36 pm

Only other thing that comes to mind are the portable winch carriers that slot into a receiver. Maybe get something made up for a front receiver? Not sure of the engineering but sounds doable. One of these https://www.roadrunneroffroad.com.au/1- ... t-portable
User avatar
Crash486
 
Posts: 1591
Joined: Tue Jan 11, 2011 7:19 pm
Location: Blue Mountains, NSW

Re: Cobra 4x4 winch compatible Nudge bar

Postby thebertster on Tue May 28, 2019 11:43 am

Thanks guys. Appreciated
thebertster
 
Posts: 2
Joined: Fri Mar 09, 2018 7:43 am

Re: Cobra 4x4 winch compatible Nudge bar

Postby twig on Sun Jun 30, 2019 7:38 am

thebertster wrote:Hi Guys,
Can someone put me in touch with Bill re his Xrox bar?

Thread is here: https://newtriton.net/phpbb/viewtopic.p ... 25dff1d686

RE: Front hitch receiver mounts, the problem is nobody makes one for the triton that's engineered, ADR compliant, etc. It would need to be as you're adding a cross member to the front of the chassis.

I think the cheapest option is almost always going to be a bullbar of some kind as the engineering is done.
twig
 
Posts: 13
Joined: Tue Oct 15, 2013 11:42 am

Re: Cobra 4x4 winch compatible Nudge bar

Postby Intruder on Sun Jun 30, 2019 6:07 pm

McAmour 4x4 also do a similar bar to the xrox if you google them.

You will still need to cut bumper to just install centre section of the xrox bar. Pending winch you may need to do a few more cuts too. Bill’s thread explains it very well.
Yes... I'll have another beer.
Intruder
Platinum Subscriber
 
Posts: 47
Joined: Thu Jan 10, 2013 5:29 am
Location: Hobart, Tasmania

Re: Cobra 4x4 winch compatible Nudge bar

Postby Sam579 on Mon Jul 01, 2019 8:25 pm

Quite Clear images.
Sam579
 
Posts: 1
Joined: Mon Jul 01, 2019 8:23 pm
Location: Pune


Return to Exterior Mods

Who is online

Users browsing this forum: No registered users and 6 guests