Challenger Tow Bar

[RossyB07]

Hey gang,

Wondering if anyone knows if a HR no rear step tow bar would fit on a
Challenger?

RossyB

[killa]

I'm happy to measure up my Challenger if someone else can measure up the bar?

[RossyB07]

Ahh cool mate. Will post up measurements tomorrow.

[RossyB07]

Hey Killa, the bar slots up the outside of the chassis so I measured from those two points which is approx 1075mm. Pretty hard to go off. Just need some sort of idea

[killa]

I measured my chassis as 1070mm across (outside to outside).
My tow bar bolts up with 4 bolts on each side; 3 along the chassis rail that are all 60mm apart (None of them pass right through the chassis so there must be insets there) and one underneath that bolts up into the chassis.







HTH

[RossyB07]

Legend! All looks good atm. Measurements seem to add up an so do the holes and bolts. Appreciate your help mate. Even pics! Lol cheers

[RossyB07]

Ok, update on this topic. A Hayman Reece without rear step tow bar that suits mn triton models will not fit to a 2012 challenger. Full stop lol. Was worth a shot.