WIP Wheel offset bible

Need something to get you rolling?

WIP Wheel offset bible

Postby 4wd26 on Fri Apr 29, 2011 7:04 am

The following is a listing of the wheel sizes that comes standard for the Triton; other vehicle makes with the same stud pattern; and wheels from 3rd party manufacturers. It was compiled to assist other Triton owners in wheel selection.

The following list only includes 6 stud on 139.7mm PCD wheels. The Triton is lucky in that the centre bore is the smallest in the market- all rims in 6 stud 139.7 PCD will fit (subject to other constraints)

Note that the triton rims are "stud centric" use the studs to centre and hold the wheel, such that the hub is not weight loading- but different rims require different wheel nuts- make sure the correct type is used.

BUT.....new info regarding steel rims and alloy rims in VSB14

Replacement wheels must be designed for the particular hub/axle and have the same bolt/stud pitch circle diameter and the same centre location method. The wheel nuts or bolts must have the same tapers as the wheel. Wheels with slotted bolt/stud holes must not be used.
Replacement aluminium alloy rims must be located on the hub/axle by the same diameter centre spigot as the original wheel, using suitable adaptor rings where necessary.
Wheel nuts and bolts must have a thread engagement length at least equal to the thread diameter, except where specified otherwise by the vehicle manufacturer.
Wheel spacers (or adaptors for dual wheel conversions) between the wheel mounting face and the road wheel must not be used unless fitted as original equipment by the vehicle manufacturer.
Modifications to disc brake callipers, hubs and suspension and steering components to enable the fitting of replacement wheels must not be undertaken.



To use this list successfully, you need to do the following:
1. Look up the wheel size and offset for your current vehicle. (note: If you have a GlX you can change to wider wheels. In this case, use the next model up as a point of reference- this may require flares)
2. Look down the list and find the wheel(s) with the same offset or lower.
Note the lower the number the wider the track
3. The wheel diameter and width is then up to you. There are various things to consider when choosing diameter and width, so I won't go further into this here.
4. Make sure you double check with the tyre shop or search through New Triton for other members who have successfully made a swap.

The list is currently incomplete. Please advise if you have something to add (including any corrections) and I will maintain this first post.


Originally Posted by New Triton Team (Disclaimer ;) )
NewTriton wishes to make clear that the information contained here may be incorrect and or out-of-date, confirmation of rim specifications and suitability should be obtained from the manufacturers website or local reseller prior to purchase. Hereafter, you the reader, acknowledge that the use of this information is at your own risk and modifications using this information may not be legal under the Australian and or State Road Traffic Acts.


What offset means

Triton ML
GLX- steel or alloy 16x6.0 ET46
VR- Alloy 16x7.0 ET38
GLX-r alloy16x7.0 ET38
GLX-r alloy (MY2009- after april 2008) 17x7.0 ET38

Triton MN
GL-r Alloy 17x7.0 ET38
GLX-r Alloy 17x7.5 ET38

Challenger PB (2010 on)1
7" x 7.5" ET38

PC Challenger
Base model has a 16" x 7" (+38)
LS model has 17" x 7.5" (+38)

http://www.mitsubishi-motors.com.au/vehicles/challenger/specifications

Pajero
NM, NS, NT
factory alloy or steel 17x7.5 ET46


Toyota Prado Standard Rims
90 Series
Steel and Alloy 16x7.0" 4wd26 265/75/16
Fitted with 265/75/16 tyres these fit into the guards very nicely, and come out flush with the outside edge of the flare on the GLX-r.


120 Series
GX/Standard 17x6" ET15
GXL+ 17x7.5 ET30
150 Series
GX 17x6.5" ET15
GXL 17x7.5" ET25
VX+ 18x7.5" ET25

Other Vehicles with a 6-stud Pattern
Toyota Hilux
17x7.5" ET30
16x
15x
Landcruiser 80 and 79 series utes
16x8" ET-13
FJ Cruiser
17x7.5" ET15
Ford Ranger
17x7.5" ET10 ????
Hummer H3
16x7.5" ET 38
Nissan Patrol (GU)
17x8.0" ET10 Hicko 265/65/17
The wheels fit under the flared guards but the tyres that are on stick out passed about 15-20mm


Isuzu D-max
Great Wall V240
Holden Colorado
Nissan Navara D22

NOTE- Nissan navara D40 and Pathfinder (latest models) WILL NOT FIT- different/ smaller PCD- even though 6 studs

Aftermarket Manfacturers & Rim Styles
CSA - multiple choices CSA fitment guide Triton Check also "Prado" for additional offset choices nearer to zero offset
CSA Stampede 16x7 ET20 Stampede clicky
NowForThe5th wrote:Widens stance a little bit, fits just inside wheel arches with 265/70/R16 tyres.



ROH Trojan Trojan Clicky Note no offset material on website
17x7.5" ET30
ROH RTX RTX Clicky Note no offset material on website
17x8.0" ET30

Speedy Grande Grande II clicky
16x7.0" ET30
17x7.5" ET10
17x7.5" ET30
Speedy Avalanche Avalanche clicky
16x7.0" ET25
17x7.5" ET25
Speedy Flame Flame Clicky
16x8.0" ET zero
16x8.0" ET25
17x8.0" ET25


4wd26 wrote:factory alloys from the Japanese manufactures are made very strong- buggers won't give a load ratings though.

some of the steel- sunrasia rims are only rated quite low
http://www.procomp.com.au/Default.asp?MenuId=WHEEL_0152
thats lower than the tyre rating required for the triton ;)

should be up around 1200kg :o

http://www.bobjane.com.au/info/load-index-speed-symbol
Last edited by 4wd26 on Mon Jun 02, 2014 11:27 am, edited 3 times in total.
Reason: added challenger info- Thanks rosscomatic
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto


 

Re: WIP Wheel offset bible

Postby daryn on Fri Apr 29, 2011 8:01 am

Geez, bored at work this morning Selwyn ? I should say Mr Guru :D

Looks like another top post coming :)
User avatar
daryn
Valued Contributor
 
Posts: 7136
Joined: Tue Oct 07, 2008 1:37 pm
Location: Newcastle NSW

Re: WIP Wheel offset bible

Postby 4wd26 on Thu May 05, 2011 2:04 pm

New post guys- Please check and use info

If something is not right please pm a mod- and it will be changed
also looking for pics on tritons of any of these rims- or rims that have been found to fit- along with a breif description of how they fit in the guards and rubbing or triming required. This will continue to be developed and can be as good as you guys allow.

Cheers The Mod Team.
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby 4wd26 on Thu May 05, 2011 8:18 pm

going to unlock this topic, and see how it progresses- will be tightly moderated.
Post up pics and info- I will then edit the first post, but keep the info contained in the topic.
Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby Cowboy Dave on Thu May 05, 2011 10:19 pm

Avalanche rim:

Click to view larger picture
Click to view larger picture

Grande black:

Click to view larger picture

Grande silver:

Click to view larger picture
Click to view larger picture

New? Grande II:

Click to view larger picture
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: WIP Wheel offset bible

Postby Homer on Fri May 06, 2011 2:31 pm

Huge range of trick looking 4x4 wheels at Allied Wheels also.

They have the rim specs beside the photo so you can see what will fit after reading 4WD26's info above 8-)

ALLIED WHEELS

No connection or anything, I just found they had probably the biggest range locally and heard the quality is OK too. Distributors in most places.
I hate to advocate drugs, sex, alcohol, violence, or insanity to anyone, but they’ve always worked for me.

Everything you want to find or know about the Triton - click here
Easy how to search on this site - click here
User avatar
Homer
Valued Contributor
 
Posts: 17128
Joined: Tue Sep 02, 2008 1:22 pm
Location: Brisbane

Re: WIP Wheel offset bible

Postby fraz91 on Sun Jul 17, 2011 3:25 pm

I've managed to get hold of a set of GU Patrol 16x8 steelies that fit the triton's stud pattern, but am unsure as to how bad the offset is? test fitted them and they work a treat, but the rim itself lines up quite nicely with the top of the guard. has anyone got any ideas on what sort of offset this is? or will i have to measure it out myself?

cheers, fraz

See the build up of my old Triton here.
User avatar
fraz91
 
Posts: 2160
Joined: Wed Mar 23, 2011 8:54 am
Location: Sydney, Australia

WIP Wheel offset bible

Postby Cowboy Dave on Sun Jul 17, 2011 3:39 pm

+10 - it's in the first post.
The Hitchhiker's guide to the the Triton universe and NTN.

A how to on finding your own way - search me.

The two threads I wish people would use more: thing 1 and thing 2.
User avatar
Cowboy Dave
Moderator
 
Posts: 18098
Joined: Tue Dec 29, 2009 9:46 am
Location: Sydney

Re: WIP Wheel offset bible

Postby fraz91 on Sun Jul 17, 2011 3:51 pm

Cowboy Dave wrote:+10 - it's in the first post.


saw that, but wasn't sure if the 16x8 steelies had the same offset as the 17x8 alloys. Not to worry though, cheers for that :)

See the build up of my old Triton here.
User avatar
fraz91
 
Posts: 2160
Joined: Wed Mar 23, 2011 8:54 am
Location: Sydney, Australia

Re: WIP Wheel offset bible

Postby ag9111 on Sun Jul 17, 2011 5:21 pm

fraz91 wrote:
Cowboy Dave wrote:+10 - it's in the first post.


saw that, but wasn't sure if the 16x8 steelies had the same offset as the 17x8 alloys. Not to worry though, cheers for that :)


Could be a 0 offset as well. There was a change around the series 2 or 3 somewere. Better measure them Fraz
I love cats, but I couldn't eat a full one!

Mud is like unprotected sex
30 secs of fun for a lifetime of grief
User avatar
ag9111
Platinum Subscriber
 
Posts: 4858
Joined: Sun Mar 30, 2008 2:00 pm
Location: Wollongong, NSW

Re: WIP Wheel offset bible

Postby snowman on Sun Jul 17, 2011 5:25 pm

http://www.rimsntires.com/specs.jsp

offset is nominated as the ET pulldown. good tyre comparo calculator as well
This car is like a bad drug habit. It is taking all my money and time, my family are concerned, but new mods just feel sooooooo good.
User avatar
snowman
Platinum Subscriber
 
Posts: 12031
Joined: Sat Feb 07, 2009 10:59 pm
Location: Toongabbie, NSW

Re: WIP Wheel offset bible

Postby SinWolf on Tue Feb 21, 2012 4:00 pm

Hi...

Can one fit a zero offset rim on the Triton ? Does anybody maybe have some pics of a Triton with zero offset rims ?? (pics from the rear/front of vehicle to see how much the wheels stand out ???)

Thanks
SinWolf
 
Posts: 164
Joined: Tue Jun 08, 2010 8:05 pm
Location: South Africa

Re: WIP Wheel offset bible

Postby ag9111 on Tue Feb 21, 2012 4:06 pm

Kwijibo and hommer run 0 offset rims but the width will determine protrusion outside the guards. You need to nominate a width
I love cats, but I couldn't eat a full one!

Mud is like unprotected sex
30 secs of fun for a lifetime of grief
User avatar
ag9111
Platinum Subscriber
 
Posts: 4858
Joined: Sun Mar 30, 2008 2:00 pm
Location: Wollongong, NSW

Re: WIP Wheel offset bible

Postby SinWolf on Tue Feb 21, 2012 4:13 pm

ag9111 wrote:Kwijibo and hommer run 0 offset rims but the width will determine protrusion outside the guards. You need to nominate a width


On the spicific rim, I can choose between 8J or 10J... So I would probably take the 8J...

@Homer & @Kwijibo

Any pics pleaase ??


THANKS !
SinWolf
 
Posts: 164
Joined: Tue Jun 08, 2010 8:05 pm
Location: South Africa

Re: WIP Wheel offset bible

Postby ag9111 on Tue Feb 21, 2012 4:23 pm

SinWolf wrote:
ag9111 wrote:Kwijibo and hommer run 0 offset rims but the width will determine protrusion outside the guards. You need to nominate a width


On the spicific rim, I can choose between 8J or 10J... So I would probably take the 8J...

@Homer & @Kwijibo

Any pics pleaase ??


THANKS !


Youll probably have to look in their sheds or PM direct
I love cats, but I couldn't eat a full one!

Mud is like unprotected sex
30 secs of fun for a lifetime of grief
User avatar
ag9111
Platinum Subscriber
 
Posts: 4858
Joined: Sun Mar 30, 2008 2:00 pm
Location: Wollongong, NSW

Re: WIP Wheel offset bible

Postby 4wd26 on Tue Feb 21, 2012 4:31 pm

Getting Out There
Sucks to be you, glad I bought a 3.2 :o
User avatar
4wd26
Moderator
 
Posts: 8299
Joined: Tue Dec 18, 2007 3:00 pm
Location: Bayside Bundy and Monto

Re: WIP Wheel offset bible

Postby SinWolf on Tue Feb 21, 2012 4:40 pm

THANKS !!
SinWolf
 
Posts: 164
Joined: Tue Jun 08, 2010 8:05 pm
Location: South Africa

Re: WIP Wheel offset bible

Postby wi53yz_4wd on Tue May 15, 2012 7:28 pm

would rims with a 20mm positive offset fit on a triton with out going pas the guards
wi53yz_4wd
 
Posts: 69
Joined: Sun Apr 08, 2012 7:37 pm
Location: dapto, new south wales

WIP Wheel offset bible

Postby motoz on Tue May 15, 2012 7:46 pm

wi53yz_4wd wrote:would rims with a 20mm positive offset fit on a triton with out going pas the guards


The rims arn't the problem, it's the tyres that cause the grief. You should be fine with a 265 though any wider you'd be getting close.
One day your life will flash before your eyes. Will it be a good show ???
User avatar
motoz
Platinum Subscriber
 
Posts: 3049
Joined: Sat Jun 26, 2010 9:23 pm
Location: Adelaide Hills

Re: WIP Wheel offset bible

Postby ag9111 on Tue May 15, 2012 8:21 pm

wi53yz_4wd wrote:would rims with a 20mm positive offset fit on a triton with out going pas the guards


I run +15 offset 8" wide with 265 tyres and it could be argued both ways on this point.

I am going to 285 on the same rims and they will stick out for sure
I love cats, but I couldn't eat a full one!

Mud is like unprotected sex
30 secs of fun for a lifetime of grief
User avatar
ag9111
Platinum Subscriber
 
Posts: 4858
Joined: Sun Mar 30, 2008 2:00 pm
Location: Wollongong, NSW

Re: WIP Wheel offset bible

Postby NowForThe5th on Tue May 15, 2012 8:25 pm

wi53yz_4wd wrote:would rims with a 20mm positive offset fit on a triton with out going pas the guards


If you have a look in 4wd26's first post you'll see that he quotes me on P20 offset wheels and 265's. The fit is near perfect.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Re: WIP Wheel offset bible

Postby Adz on Tue Jun 12, 2012 1:46 pm

Hey guys, long time no talky!

Here's my calculations for new rims & tyres I plan on getting:

265/75/16 Maxxis Bighorn 764
16 x 7 sunnies (or equiv.) - 6 x 139.7 PCD 18+ offset

I figure by these calcs, they will be 99% perfect & not sit outside the guards, or scrub! 8-)
You can sit there complaining, or you can knit me some seat belts.
User avatar
Adz
 
Posts: 1063
Joined: Wed Jan 14, 2009 7:44 am
Location: Springfield ;) ACT

Re: WIP Wheel offset bible

Postby ag9111 on Tue Jun 12, 2012 2:21 pm

Adz wrote:Hey guys, long time no talky!

Here's my calculations for new rims & tyres I plan on getting:

265/75/16 Maxxis Bighorn 764
16 x 7 sunnies (or equiv.) - 6 x 139.7 PCD 18+ offset

I figure by these calcs, they will be 99% perfect & not sit outside the guards, or scrub! 8-)


Hey Adz.
I run +15 offset on 8" rims with 265's. perfect combination and doesn't stick outside the guards. :D
I love cats, but I couldn't eat a full one!

Mud is like unprotected sex
30 secs of fun for a lifetime of grief
User avatar
ag9111
Platinum Subscriber
 
Posts: 4858
Joined: Sun Mar 30, 2008 2:00 pm
Location: Wollongong, NSW

WIP Wheel offset bible

Postby Adz on Tue Jun 12, 2012 8:08 pm

Sounds about right ag9111 ;)
You can sit there complaining, or you can knit me some seat belts.
User avatar
Adz
 
Posts: 1063
Joined: Wed Jan 14, 2009 7:44 am
Location: Springfield ;) ACT

Re: WIP Wheel offset bible

Postby NowForThe5th on Tue Jun 12, 2012 10:49 pm

Hey Adz! Welcome back! :D

I have 265/70R16 AT's on wheels with +20 offset. Sits just inside flares, near perfect. Mudflaps just cover the tyres too so doesn't look wrong from behind. There is a noticeable improvement in stability and handling too. The only drawback to the setup you're looking at is the weight of the steelies. They will affect braking performance significantly. If you can find a set of alloys that fit (and at the right price) they might be a better solution.
Chris

If work is so terrific, why do they have to pay us to do it?
User avatar
NowForThe5th
Moderator
 
Posts: 9226
Joined: Sun Jun 15, 2008 2:00 pm
Location: Holt, ACT

Next

Return to Tyres & Wheels

Who is online

Users browsing this forum: No registered users and 3 guests