Its been a while but few more pics of the rig as its coming along. Still rocking the standard rubber trying to wear it out before i change over and havent been on any big trips where iv needed better treads. Anyway I got a chance to play with the stereo before i drove her up to work so kinda wanted better tunes. so iv taken to and put a heap of dynamat in the doors and around the place set of type r splits in the front doors and some 6x9s in the back of the cab just floating free in some boxes. changed the head unit and stuck an amp under the passengers seat.
I also got to and blanked the egr and did the Longranger mk1 mod so thought id get the scan gauge and while i was at it stick a boost gauge and egt gauge in there.
the new head unit and scan gauge sitting up there.
6x9 sitting in the back
the gauges on the a pillar
stuck the uhf that i had from the previous rig in and next to it are a couple of light switches and the disengage the front diff to have 2wd low range switch.
in the back of the clubby where the silly back seats were iv built a storage unit to house all the stuff ya have to have but dont really wanna use all that often and it makes a nice flat platform for the other things that need to stay dry rather than in the tray. also i stuck a stripp of flexible led lights along the back to light the area up, it works quite well.
and how the storage boxes work
fitted a small air tank and plumbed the compressor into it (all be it temporarilly as im going to put the compressor in a quieter box or outside under the tray.
a bit of power to the back of the cab for the fridge and other things also makes getting power for devices inside the cab easier than running from the battery every time. it still needs a permanent cover to complete it and make it look tidy and less vulnerable to damage
and the work lights in all their glory so good for seeing in the tray at night and helps when trying to reverse in tricky spots.
still a heap of stuff to do. im going to fab up some sliders and fit a snorkel as well as finish of the bash guards im halfway done with. Then its diff ration changes and some decent treds and maybe a chip.