Tritium wrote:I have the Brown and Davis on an ML.
It has a 10c piece glued to the bottom of the tank. The internal baffle near the fuel intake has cracked. Pulling a small hole close to the middle of the floor.
Leak was just a seep but actually proved hard to find as the bulk of the dust build up ended up at the rear of the tank.
When you are filling the tank you hear an audible flexing of the floor from the weight of the fuel at around 80 litres.
Couldn't be bothered to pull the tank out and get it welded. The 10c/silicon option is sufficing at present.
Users browsing this forum: No registered users and 5 guests